nedis SPBT2480BK Kurzanleitung Seite 5

• Disconnect the product from the power source before
cleaning.
• Do not immerse the product in water or other liquids.
• Do not use aggressive chemical cleaning agents when
cleaning the product.
• Only use the provided USB charging cable.
• Only charge the product via a 5V/1–2A power adapter or a
PC.
• Do not dismantle, open or shred cells or batteries.
• Do not expose cells or batteries to heat or fire. Avoid storage
in direct sunlight.
• Keep cells and batteries clean and dry.
• Do not leave a battery on prolonged charge when not in
use.
• After extended periods of storage, it may be necessary to
charge and discharge rechargeable cells or batteries several
times to obtain maximum performance.
Charging the product
-
Only use the provided USB charging cable.
-
Only charge the product via a 5V/1–2A power adapter or
a PC.
The product is delivered with a partially charged battery. For
4
optimal battery life, fully charge the battery before using
the product for the first time.
1. Plug the USB-C connector of the USB - USB-C charging cable
A into the USB-C charging port A
e
2. Plug the other end of the USB – USB-C charging cable A
into a 5V/1–2A power adapter.
3. Plug the power adapter into a power outlet.
Selecting a mode
1. Press and hold the power button A
product.
2. Select your preferred music source:
Bluetooth® mode
USB mode
AUX mode
Activate Bluetooth® on your audio
device and connect with the product
(SPBT2480BK).
Plug a USB flash drive into the USB
slot A
.
9
The product automatically plays the
stored music.
1. Plug a 3.5 mm audio cable A
into the AUX port A
2. Plug the other end of the 3.5 mm
audio cable into your audio device.
5
8 .
to switch on the
1
w .
e
r