Instant INFUSION BREW Benutzerhandbuch Seite 9

INITIAL SETUP
1. Remove the Infusion Brew and all accessories out of the box.
2. Remove all packaging materials from within and around the unit.
3. Place the unit on a dry, stable and level surface.
4. Plug in your Infusion Brew.
Setting the Clock
When you first turn on your Infusion Brew, the clock display will show
the default time of 12:00 AM. Setting and changing the time is quick
and easy.
1. Make sure your Infusion Brew is turned on.
2. Press the
time is set. To speed up, press and hold for 2 seconds.
Anytime the display is in ready/standby mode, you can re-enter time setting
mode. Simply press and hold either the
the time.
3. Press the
4. Your clock is now set!
Clean before use
1. Lift the water reservoir up to remove from the coffee maker.
2. Handwash the glass carafe, water reservoir, reusable coffee filter
and brew basket with warm water and dish soap. Rinse with
warm, clear water. Wipe with a clean, dry cloth.
3. With a damp cloth, wipe down the coffee maker base and
control panel.
and buttons on the control panel until the correct
button to save the new time.
User Manual
or button to set or change
7