Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Test Run
Before you brew your first carafe of coffee, we recommend flushing
your Infusion Brew to make sure the unit is clean and working
correctly. DO NOT use coffee for the test run.
1.
Remove the water reservoir lid. Lift the water reservoir from the
back of the coffee maker.
2.
Fill the water reservoir with cold water to the MAX fill line
as indicated.
Be careful not to over-fill.
3.
Place the water reservoir back onto the coffee maker then replace
water reservoir lid.
4.
Place the glass carafe onto the warming plate, under the
removable brew basket.
5.
Ensure the coffee maker lid is closed. Press the
control panel to begin brewing.
6.
After the brewing cycle ends, the keep warm setting will
automatically activate and the warming plate will stay hot for
40 minutes. Press the
7.
Carefully remove the glass carafe and discard the water in the
carafe. The water and warming plate will be hot.
To stop brewing at any time press the
8.
Carefully place the glass carafe back on to the warming plate.
The warming plate may still be hot.
9.
Your test run is complete and you're ready to start brewing!
button to turn it off.
button.
8
User Manual
button on the
Werbung
