Werbung
Verfügbare Sprachen
Verfügbare Sprachen
23881 Adapter for
23881
monitor mount
Information for use
Intended use
The adapter is an accessory for the following monitor mount models: 23870, 23873, 23875 and
23878. With the help of the adapter various products equipped with a 3/8" or 5/8" thread can be
fitted, for e.g., tablets and Smartphone holders, microphone clamps or a quick-release adapter.
Foreseeable misapplication
The accessories should not exceed the load capacity of the monitor mount.
General
u Observe the usage information of the monitor mount in use. It is not allowed to exceed the
u
specified load capacity.
u The monitor mount should be adjusted to the weight of the attached accessories.
u The adapter and the accessories must be firmly connected to the monitor mount.
u The usage information is an integral part of the product and should be kept for its service life
u
or passed on to any subsequent owner or user.
Warranty
No warranty is given for damage caused by:
u Non-observance of the usage information and the "General safety and assembly instructions".
u Unsuitable or improper use.
u Incorrect installation or commissioning by the buyer or third parties.
u Natural wear and tear.
u Careless handling.
u Improper modifications or repair work by the buyer and third parties.
u Impact on components of foreign origin.
u Use of non-original spare parts.
Modifications, additions and conversions that may impair safety are prohibited without the manu-
facturer's approval.
Technical data
Material
Load capacity
Dimensions
Packaging
Weight
Mounting
Unpack and check product for damage and completeness
!When adjusting and assembling, there is danger of crushing between the components!
Angle and bolt: Steel, passivated, black
Knurled washer: Aluminum, anodised, black
Allen key: Steel, zinc plated
Accessories with matching thread
3/8" 30 x 34 x 53 mm
5/8" 30 x 34 x 55 mm
Polybag 80 x 140 mm
0.09 kg
Werbung
