Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Ski- and snowboard helmet
GB
User information
Opening/closing the chinstrap (Fig. D)
To open the chinstrap, press on the multi-level safety snap-in fastener (1) and pull out the bar
(2). To close the chinstrap, insert the bar into the multi-level safety snap-in fastener and allow
this to click into place at a width that feels comfortable.
If you are in an accident with the strap divider and
chinstrap open or incorrectly adjusted, the helmet
may slip and lose its protective effect!
Before each trip, check that the chinstrap is correctly
adjusted and fastened!
Adjusting the chinstrap (Fig. B)
Before each trip, check that the chinstrap is correctly adjusted.
•
The chinstrap (1) is adjusted correctly when it is comfortable and secure and you feel a
light pressure when you open your mouth. The fastener (2) should not be on the chin or
jaw.
•
If the chinstrap (1) is too loose, it must be tightened with the buckle (3) on the fastener
(2).
•
If the chinstrap (1) is too tight, it must be loosened with the buckle (3) on the fastener
(2).
Before each trip, check that the strap divider is cor-
rectly adjusted and fastened!
Adjusting the strap divider (Fig. C)
•
Open the strap divider.
•
The strap divider must be positioned in such a way that the straps are tight but comfortable.
The strap divider must be placed under the ears, the straps should not cover the ears.
•
Close the strap divider.
28
Werbung
