MP glass SWANN BLACK Montageanleitung Seite 6

EN
TECHNICAL SPECIFICATIONS - ENVIRONMENTAL PROTECTION
Nominal voltage
220-240V~
Nominal frequenc
50/60Hz
Nominal output power
SWANN BLACK LED 75 / MAX.42W / LED 18W
SWANN BLACK LED 90 / MAX.55W / LED 21W
Lamp
LED 3000°K - 4000°K - 6500°K - IRC80
Protection class
CLASS II
IP Protection rating
IP 44
WARNING!
This product bears a symbol relating to the disposal of waste of electrical
and electronic products. This means that this product must not be
disposed of with household waste, but must be deposited in a recovery
system in accordance with EU Directive 2012/19/EU. It means that
this product must be recycled or dismantled in order to reduce its impact on the
environment. The electrical equipment contains hazardous substances which may
pose a risk to the environment and human health.
10
10
MISCELLANEOUS AFTERSALES SERVICE, REPAIRS, GUARANTEE, ETC.
Have this appliance repaired by a qualified professional.
This electrical product complies with the safety standards in force. Repairs must only
be carried out by qualified technicians using original spare parts. Any failure to follow
these instructions can be particularly dangerous to users.
If necessary, contact the after-sales service of the store where you purchased this
product.
Information for the external connection box:
• Connect the electricity supply to the terminal block, respecting the following
connection colour code:
- Connect the Brown Wire (Live) to the corresponding terminal marked L on
the terminal block.
- Connect the blue wire (Neutral) to the corresponding terminal marked N on
the terminal block.
• Attach the mirror to the wall.
• Turn the electricity supply back on and switch on the luminaire. Your luminaire is
now ready to be used.
Use a double-insulated 3G 1,5 mm² silicone rubber power cable . The operating
temperature of the cable must be above 130°C. The external diameter of the cable
must be over 9 mm to ensure optimum insulation.
11
11
EN