Levenhuk Ermenrich Ping SM100 Bedienungsanleitung Seite 4

Ermenrich Ping SM100 Wire Tracker
EN
Please carefully read the safety instructions and the user manual before using this product. Keep away from children. Use the device
only as specified in the user manual.
The kit includes: transmitter with alligator clips, receiver, USB cable, DC adapter for charging, earbuds, carry bag, user manual, and warranty.
Getting started
Shift the on/off-switch (7) to the ON-position to turn the transmitter on.
Shift the on/off-switch (7) to the OFF-position to turn the transmitter off.
Press and hold the power button (14) for 3 seconds to turn the receiver on/off.
Turn the sensitivity adjustment knob (6) on the transmitter and the sensitivity adjustment knob (15) on the receiver clockwise to adjust the
sensitivity levels from 1 to 8.
Charging the device
The transmitter and the receiver use rechargeable lithium batteries. Connect the USB cable to the device and the DC adapter via a USB plug
and connect it to the AC power supply to charge the device.
When the battery is low, the low battery indicator will blink; immediately charge the device.
Electrical cable tracing
1. Clamp the red alligator clip to the phase wire or the positive terminal of the testing cable; and clamp the black alligator clip to the
grounding wire or to the grounding terminal of the testing cable. To trace a multicore cable, clamp the red alligator clip to any color core
of the cable and then clamp the black alligator clip to the cable shielding or clamp it to ground.
2. Press button (5) to switch the transmitter to the scanning mode.
3. Turn the sensitivity adjustment knobs (6 and 15) to the maximum sensitivity.
4. Place the receiver near the cable bundle (or near the surface where the cable is hidden) and move the receiver along the cable to trace
it. When the sensor is in close proximity to the target cable, the receiver will emit a beeping sound. To detect the cable more accurately,
lower the sensitivity. The closer the device is to the object, the louder the signal will be.
!
The maximum voltage of the circuit to be tested with the use of the alligator clips shall not exceed 220V AC.
Telephone cable tracing
1. Connect a telephone cable or a network cable to the transmitter using the telephone adapter cable (8).
2. Press button (5) to switch the transmitter to the scanning mode.
3. Turn the sensitivity adjustment knob (6 and 15) to the maximum sensitivity.
4. Place the receiver near the cable bundle (or near the surface where the cable is hidden) and move the receiver along the cable to trace
it. When the sensor is in close proximity to the target cable, the receiver will emit a beeping sound. To detect the cable more accurately,
lower the sensitivity. The closer the device is to the object, the louder the signal will be.
Power cable tracing
1. Connect a power cable to the power cable socket (4) of the transmitter.
2. Press button (5) to switch the transmitter to the scanning mode.
3. Turn the sensitivity adjustment knob (6 and 15) to the maximum sensitivity.
4. Place the receiver near the cable bundle (or near the surface where the cable is hidden) and move the receiver along the cable to trace
it. When the sensor is in close proximity to the target cable, the receiver will emit a beeping sound. To detect the cable more accurately,
lower the sensitivity. The closer the device is to the object, the louder the signal will be.
!
The maximum voltage of the circuit to be tested by means of connection to the power cable socket of the transmitter shall not
exceed 400V.
!
Observe the safety precautions to avoid the risk of electric shock.
Specifications
Detectable cable types
Detection and tracing of underground and hidden wires
Max. detection depth
Anti-jamming function
De-energized cable detection
Live cable detection
Max. voltage of power cables (connection with the use of the power
cable socket)
Max. voltage for tested circuits (connection with the use of alligator
clips)
Operating temperature range
Power supply
The manufacturer reserves the right to make changes to the product range and specifications without prior notice.
power cables, multicore wires, coaxial cables, telephone cables,
network cables
+
2m
+
+
+
400V
220V AC
–10... +40°C / +14... +104°F
transmitter: 3.7V, 1800 mA·h rechargeable lithium battery
receiver: 3.7V 1100mA·h rechargeable lithium battery
(5V 1A DC adapter)
4