neno Uno Bedienungsanleitung Seite 17

1. Cleaning (Before first use and after each use):
SEE FIG. E
Step 1 - Disassemble the device and rinse all parts that have come into contact with
the breast and milk in cold water to get rid of the remains of milk and any residue.
Step 2 - Soak in warm, soapy water for 5 minutes, then wash and rinse
Step 3 - Let the parts air dry. Store dry device parts in a cool and dry place when
you're not using them.
2. Disinfection (before first use and once per day):
SEE FIG. F
Step 1 - Fill the pot with enough water to cover all parts of the disassembled device.
Do not place the device in water yet. Bring water to the boil.
Step 2 - Place the parts of the device in boiling water for 10 minutes.
Step 3 - Let the parts air dry. Store dry device parts in a cool and dry place when
you're not using them.
3. Cleaning the pumping device:
SEE FIG. G
Prepare: mild soap or other cleaning agent, clean dish towel.
Parts that need to be cleaned: pumping device.
WARNING:
- Do not submerge the pumping device in water.
- Do not rinse the pumping device with water.
- When cleaning the display of the pumping device, use only a damp, soft cloth
with a mild soap or cleaner. Stronger cleaning products or abrasive materials can
destroy the display.
15. SPECIFICATION
Output power: 110-240V 50-60Hz | Input power: 5V 1A | Weight: 300 g | Dimen-
sions: 81x66x62 mm | Battery capacity and type: 3.7V 1400 mAh Li-Ion
16. WARRANTY CARD/ COMPLAINTS
The product is covered by a 24-month warranty.
The terms of the guarantee can be found at: https://neno.pl/gwarancja
Details, contact and website address can be found at: https://neno.pl/kontakt
Specifications and contents of the kit are subject to change without notice. We
apologise for any inconvenience.
17