Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Do not lay down the device before all the rotary parts stopped.
•
Do not keep the tool running while carrying it.
•
Maintain a firm grip on the power tool and position your body and arm to allow you to
resist kickback forces. Always use auxiliary handle, if provided, for maximum control
over kickback or torque reaction during start-up. The operator can control torque
reactions or kickback forces, if proper precautions are taken.
•
Never place your hand near the rotating accessory. Accessory may kickback over your
hand.
•
Switch off the unit immediately in case of blocking or twist. Disconnect the power supply
and do not switch on again until the problem is solved. Understand the reason why the
tool has been blocked and make sure that this situation will not occur once more by
counteract accordingly.
For additional safety information consult:
•
Your employer, union and/or trade association.
•
Council of the European communities and/or local codes
Maintenance:
•
Damaged or worn out parts should be replaced only by licensed original parts. Get in
contact with your dealer or a authorized service station for support. Using unlicensed
parts male functions could occur followed by possible hurts of health.
•
Check the tool regularly to recognize cracks, unusual clearance, mismatch and to check
the moving parts for proper operation.
•
Recognizing a abnormality the unit needs to be provided to a authorized service station
before using it again. Please consider that many accidents are cause by insufficient
maintenance.
Tool applications:
•
Wet and Dry Vacuum Cleaner: To vacuum non flammable or non explosive objects
Explanation of the pictograms:
Always use hearing protection, eye-protection and read / understand the instruction manual.
and liquids by using original accessories (filter) only.
12
Werbung
