nedis SPBT3950BK Kurzanleitung Seite 5

• Do not use aggressive chemical cleaning agents when
cleaning the product.
• Do not use the product if a part is damaged or defective.
Replace a damaged or defective product immediately.
Charging the product
The product is delivered with a partially charged battery. For
4
optimal battery life, fully charge the battery before using
the product for the first time.
1. Plug the USB-C connector of the USB - USB-C charging cable
A into the USB-C charging port A
q
2. Plug the other end of the USB – USB-C charging cable A
into a 5V/1–3A power adapter.
3. Plug the power adapter into a power outlet.
Using the product
1. Press and hold the power button A
product.
2. Press the mode button A
USB, and AUX mode.
Bluetooth® mode
USB mode
AUX mode
3. Press and hold the play/pause button A
change, or deactivate the RGB lights A
Pairing two products for True Wireless
Stereo (TWS)
Press the volume down/previous track button A
4
the volume up/next track button A
disconnect your audio source.
7
to switch on the
5
4 to switch between Bluetooth®,
Activate Bluetooth® on
your audio source and
connect with the product
(SPBT3950BK).
1. Plug a USB cable (not
included) into the USB
port A
2. Plug the other end of the
USB cable into your audio
source.
You can also use a USB stick.
1. Plug a 3.5 mm audio
cable (not included) into
the AUX port A
2. Plug the other end of the
3.5 mm audio cable into
your audio source.
w
simultaneously to
2
5
.
.
8
.
9
3 to activate,
.
1 and
q