Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
www.mobilex.dk
The device consists of the following elements:
1. Rubber foot
2. Mounting slot
3. Soft seating pad
4. Support arm
Assembly description
Prior to use, put the soft seating pad on the frame by
fitting 4 pins of the seat with slots in the frame.
Function description
Adjusting the support arm spacing
Adjust the position of all support arms so that the rubber
feet will all reach the walls of the bath in a way that the
device will not move from side to side when put on the bathtub. To adjust support arms on one side of the device,
pull out 2 locking clips located under the arm's mounting slots. The arms can then be pulled out by pushing in the
locking fedder and pulling the support arms. All arms should be adjusted to the same spacing.
General use
The bath seat can be easily placed on top of the bathtub's walls by putting the rubber feet on the walls of the
bathtub.
Accessories
There are no accessories provided for this device.
4. Technical data
Bathtub seat
Dimensions (W x D x H)
Seat dimensions (W x D)
Suitable for bathtubs
Weight
Max. User weight
Product label
MOBILEX A/S
Grønlandsvej 5
DK - 8660 Skanderborg
Tel: +45 87 93 22 20
www.mobilex.dk
Example of the product label
5. Care and maintenance
Regular dirt can be removed with standard cleaning products and a sponge or soft rag. Check the specific product
information and use only commercial cleaning products which are suitable for cleaning. For disinfection, use only
disinfectants certified for use with medical devices available locally.
Despite the solid construction and the use of resistant materials the product is subject to wear. It is therefore
recommended to check the product at regular intervals by a professional service. We recommend the following:
✔
Cleaning and disinfection of the product
✔
Checking the frame for bends, damage, wear or corrosion
✔
Checking wear parts and replacing them if necessary
✔
General re-tightening of the components
Recommended service life: Normally 10 years, depending on use.
Storage: We recommend storage in a dry place in temperatures above 0 °C.
Rev. 02-24
Bathtub seat
REF
302012
≦150 kg
MD
2021.09.21
SN
0001
10/24
1 2 3
4
Art. 302012
73,5 - 87,5 x 42 x 23 cm
41 x 34 cm
60 - 75 cm
2,60 kg
150 kg
Meaning of the icons
UM-302012_MULTI_20240208
Werbung
