Inputs for external signals
The
BlueCom 102
Illustration boottom side
1 AUX 1 (IN)
2 Charge control
3 AUX 2 (IN/OUT)
4 Charge socket
5 Programming switch
AUX IN
With
it is possible to receive audio signals, like MP3, GPS or
car radio with a 3 pole, 3,5 mm jack plug connection. On request the
signal for the pillion can be deactivated with a programming switch
(e.g. for the driver when the helmet sets were switched). The program-
ming switch you can find next to the connecting socket. For signal
suppression press the switch upward with a small screwdriver.
IN / OUT
With the
mobile phones with a 3 pole, 3,5 mm jack plug.
Adequate cables are available as accessories.
Important safety advices
Never try to change the setting of the devices while driving!
Bluetooth devices are wireless transmitting sets with a small
range and are not allowed everywhere, please remind safety
14
pocket repeater has two inputs for external signals.
1
socket it is possible to connect two-way radios or
advices.
2
3
1 2
ON
4
5