Jata JBCP4200 Bedienungsanleitung Seite 20

manufacturer or by its after-
sales service or similar
qualified personnel in order to
avoid any danger.
• If there is any nylon filament
found on the blades, it's due
to the quality control made in
each unit.
INSTRUCTIONS OF USE
• The appliance is for hair cutting and doing the
beard and the moustache and for the well-
finished of the sideburns and neck and as body
trimmer.
• The hair clipper may be used while connected to
the mains with the cable or else autonomously
(without connecting to the mains).
USE WITH THE CABLE
• Connect the cable terminal (5) on the back of
the device and the USB plug to the adapter (not
included) to the network.
• Slide the on/off switch (3) to start its operation.
Repeat the same operation to turn it off.
USE AND CHARGE OF BATTERY
• Before using for the first time, it is necessary to
charge the battery.
• Connect the cable terminal (5) in the back side of
the appliance and the USB plug to the adaptor (not
included) to the mains.
• The charge indicator (4) will flash during charging
and the timer will increase up to 90. Once charged
(approximately 1 hour), the indicators will remain
fixed.
• In order to optimise the durability of the battery
bear in mind the following pieces of advice:
- Never exceed the indicated loading times for the
battery.
20