Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Figure 22: Connection example – LN230 extraction and filter system connected to a benchtop laser
7.5.
Installing pipes
Your regional TBH sales team will gladly assist you with the planning of piping using hoses or
•
spiral pipes. This ensures that all required parts are ordered.
To prevent the escape of possibly hazardous substances, the piping etc. must be leak tight.
•
If the filters are inserted during installation, ensuring their correct fit is essential (are all seals well
•
compressed?).
7.6.
Using capture elements
In principle, all types of capture elements can be used in combination with a TBH extraction and
filter system using a hose or pipe, for example, extraction arms, hoods, nozzles, enclosures, laser
enclosures, etc.
Attention!
Do not use capture elements that impair the mechanical or electrical safety or the
stability of the TBH extraction and filter system or its accessories.
Note!
Making mechanical changes to a TBH extraction and filter system, such as drilling
fastening holes, voids all guarantees, warranties, and liability of TBH.
When choosing the capture element, make sure that it is suitable for capturing all emissions
produced by the emission source.
Information for commissioning the system
101
Werbung
