Seite 2
A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories.
Seite 3
Do not turn on your headphones while charging. The headphon es will automatically enter Bluetooth pairing mode when Use a certified USB-C charging cable and charger to prevent any connecting for the first time. Select "soundcore Space One" on your damage. device's Bluetooth list to connect.
×1 ×1 Reject a call Press and hold for 2 seconds * You can enable Normal mode in the soundcore app. Mute / Restore the microphone Press and hold for 2 seconds Activate Voice Assistant Press and hold for 2 seconds...
Seite 5
WEARING DETECTION LDAC Enable LDAC in the soundcore app for higher-quality audio. *Only available on devices powered by Android 8.0 or later. LDAC WIRED LISTENING • Use devices powered by Android 8.0 or later to experience LDAC quality sound. • LDAC provides higher quality sound, increases power consumption, and reduces playtime.
FIRMWARE UPDATE SPECS Specifications are subject to change without notice. Input 0,58 A Rated output power 10mW Battery capacity 580mAh Charging time 2 hours Playtime (with ANC off) Up to 55 hours Playtime (with ANC on) Up to 40 hours Driver size 40mm Frequency response...
Schalten Sie die Kopfhörer während des Ladevorgangs nicht ein. automatisch in den Bluetooth-Kopplungsmodus wechseln, wenn sie zum Verwenden Sie ein zertifiziertes USB-C-Ladekabel und Ladegerät, ersten Mal verbunden werden. Wählen Sie "soundcore Space One" in um Schäden zu vermeiden. der Bluetooth-Liste Ihres Geräts aus, um eine Verbindung herzustellen.
2 Sekunden lang gedrückt Vorheriger Titel halten Lauter / Leiser Einmal drücken ×1 ×1 Anruf entgegennehmen / Einmal drücken Sie können den Normalmodus in der Soundcore-App aktivieren. beenden 2 Sekunden lang gedrückt Einen Anruf ablehnen halten Mikrofon stummschalten/ 2 Sekunden lang gedrückt wiederherstellen halten Aktivieren Sie die 2 Sekunden lang gedrückt...
TRAG-ERKENNUNG LDAC Aktivieren Sie LDAC in der Soundcore-App für eine höhere Audioqualität. Nur auf Geräten mit Android 8.0 oder höher verfügbar. LDAC KABELGEBUNDENES HÖREN • Verwenden Sie Geräte mit Android 8.0 oder höher, um Klang in LDAC-Qualität zu erleben. • LDAC bietet eine höhere Klangqualität, erhöht den Stromverbrauch und verkürzt die Spielzeit.