Care; Storage; Maintenance; Service Centre / Spare Part Supply - Sun Garden Easy Sun PARASOL Aufbauanleitung

5.0 Care

Clean all plastic components with a damp cloth. You can best remove
heavy soiling with a mild detergent free of scouring agents.
Note
When cleaning do not use sharp-edged tools (knives, metal
scrapers), aggressive solvents or cleaners containing scouring
agents.
To avoid damage to component surfaces please observe the
instructions for use provided with the cleanser.

6.0 Storage

The Parasol base must be stored in a dry and
frost-free location over the winter.
Note
If possible you should use the original Parasol
base packaging for storage.
• Clean the Parasol base thoroughly.
• Remove stand tube seat and Parasol base
upper mould.
• Remove the water-sand mixture from the
Parasol base lower mould.
• Allow all parts to dry and store.
Caution: Risk of injury!
Do not try to move the Parasol base when filled.
Total weight when filled approx. 150 Kg (330 lbs.)

7.0 Maintenance

You should carry out a thorough inspection of the Parasol base for damaged components once a year,
before the first setting up or before storage.

8.0 Service Centre / spare part supply

If you have any questions about setting up, require our repair service or wish to order spare parts,
please contact one of our Service Centres (see Service Centre / ordering spare parts information
sheet) or visit our Internet site at www.sun-garden.de.
Issue: 03.2003
C / S
ARE TORAGE
/ M / S
AINTENCE
Union nut
Reducer socket
Stand tube seat
Upper mould
Lower mould
ERVICE
Page 7