Werbung
Verfügbare Sprachen
Verfügbare Sprachen
24496 Speaker ceiling mount
SETUP INSTRUCTIONS (1-5)
5
Connect the loudspeaker with the mounting plate
5.a DIRECT connection:
5.b INDIRECT connection
5.b
5.b
mounting plate
FUNCTIONS (6)
6
6.a
Prior to adjusting the angle or the direction first loosen the four
half-round head screws a little, position into the desired position
and tighten all 4 screws: recommended torque (10 Nm)
CHECK, MAINTENANCE, CLEANING
- In the event of maintenance pay attention to possible risks (wedging, possibility of the
-
product being knocked into, ladder?)
- To care for the product use a damp cloth and a non-abrasive cleaning agent.
- If the product is used at productions and events the Inspection Regulations in
-
accordance with BGV C1 Sections 33 et seq apply
FAULT-FINDING (F) and REPAIR (R)
F: The ceiling mount is loose
F:
B: Check to ensure the ceiling is suitable (load bearing) (use a qualified technician)
F:
B: Check the screws and tighten/replace (use a qualified technician)
F: The loudspeaker is not properly placed in the mount - it sits loosely
F:
B: Check and re-tighten/replace the screws
F:
B: Check the loudspeaker case
F: The loudspeaker inadvertently leans forward
F:
B: Screw connections 6.a i.e. screws not properly tightened, tighten the screws
All manuals and user guides at all-guides.com
5.a.1
Screw in screws up to approx. 4mm
distance into the loudspeaker and hang
these into the mounting plate as far as
they will go
with ADAPTER PLATE
(Type: 24352 -24359)
5.b.0
Screw the adapter plate
into the loudspeaker with
both allen wrenches
24359-Ad.6
5.b.1
Place the
nuts up to approx.
4 mm distance into the
loudspeaker and hang these into the
mounting plate as far as they will go
(Screws M6 or M8 - ISO 7380, ISO 4762
not included in the delivery)
5.a.2
Tighten the lower screw
with the allen wrench
*Nm-Note details of the loudspeaker manufacturer! -general 10 Nm
(Screw M6x14, Discs ø 6,4/12 and the
safety nuts M6 are included in the
delivery of the adapter plate shown
24358-Ad.5 24357-Ad.4 24356-Ad.3
5.b.2
Tighten the lower nut
with the allen wrench (SW10)
Side view
Tilt:
0 - 45°
TECHNISCHE DATEN
Plate/bracket, tube, support arms:
Steel, powder coating, black
Material
Screws: Steel, galvanized
Bearing shells, caps: Plastic (PE, PA)
Load
Loudspeakers, max. 25 kg
Dimensions
W x D x H: 295 x 160 x 118 mm
Karton
W x D x H: 350 x 220 x 130 mm
Weight
net: 1.8 kg; gross: 2.1 kg
5.a.3
Position the holder
downwards and
tighten the upper screw
with the allen wrench
in the illustration)
24354-Ad.2
24352-Ad.1
Position the holder
downwards and tighten
the upper nut with the allen
wrench (SW10) (10 Nm)
Front view
direction: +/- 45°
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
24496-000-55 Rev.10 03-80-883-00 6/15
5.b.3
Werbung
