YESKAMO PTZ Bedienungsanleitung Seite 9

3.Make sure the QR code on the phone screen is normal and the distance
between the phone and the camera lens is 10-15cm (3.9-5.9inch) during the
scanning process.
4.Restore the product to factory settings, restart the router; and then add it
again.
5.Please contact our customer service center for further instruction after you
have followed the previous procedure but still fail the WiFi connecting.
Installation
Step 1: Select the location where you need to install the camera, take the camera
and the phone to the location, and use the "Installation Guide" in the application
to diagnose the network and determine whether the Wi-Fi signal at the location
is good.
It is recommended to install the camera in a location with good WiFi signal for
smooth camera operation.
Step 2: Use Power Drill and two screws. Secure the camera to the wall, 8-10 feet off
the ground (2.4m-3m) is recommended,secure the camera with the two screws.
1 2
7
EN EN