Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Quick User Guide
Allow "CloudEdge" to access mobile cellular data and WLAN, for able to add devices.
N
EN
Allow "CloudEdge" to receive notifications, for receive alert notifications when
motion detected.
(The IOS device guideline is on down below, Please allow Android device permissions
with similar method)
2. Register Account
New users must register by email.
1.Click on "Register";
2.Follow the steps to complete your account registration;
3.Login.
Tip:
①Make sure using the correct e-mail address.
②Please select the correct region.
③When registering for a new account, please select
the region where you are actually located. (Cross region data sharing is not
supported between your CloudEdge Account.)
3. Power and reset the camera
Press and hold the power button on your camera for 5 seconds,then you can
hear the power-on tone, then the working indicator light up, slow red light
flashing with 2 times per second rhythm, (If the working status light is not red
slow flashing, please Reset the device)
If it doesn't turn on, please charge it with DC 5V 1A power adapter for 1 hour to
wake it up.
NOTE:
DC 5V 1A power adapter is not included in package. Please use your
phone charger.
reset key
power key
Working Status
Indicator
4. Connect to WI-FI
Step 1:
Place the camera and smartphone within 1 to 3 feet (30 to 100 cm) of the
router to ensure strong Wi-Fi signal.
Note:
The camera only works with 2.4G Wi-Fi only and does not support 5G
Wi-Fi.
4
Werbung
