YESKAMO PTZ Bedienungsanleitung Seite 11

How To Use The Solar Panel
1.Please check in advance
① This solar panel is for YESKAMO battery camera only. It is mainly used in
connection with an outdoor battery camera.
② We cannot guarantee that this product can be used in combination with other
cameras.
③ The efficiency of this product is about 21%. If the weather is bad, the camera may
not be able to charge.
④ This product is IP66 waterproof, not completely waterproof (only IP67 or higher is
completely waterproof). We think that it is better to install this product and
YESKAMO battery camera on the roof.
2. Packing contents
Solar panel x1
3. Solar panel installation
Installation angle of the panel: Please install it outdoors with abundant sunlight. And
it seems better to install the panel facing the sun at an angle (latitude of your
location +5°).
Bracket x1
A.Attach the 3 included screws and 3 wall protection screw
holders to the screw holes in the bracket (when drilling holes,
please refer to the hole values of about 6mm in size and about
20mm in thickness).
B.Securely connect the panel body to the bracket.
Mounting screw
9