Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
Important!
A long cycle time will cause heat to build up inside the unit and water temperature to rise.
Do not use the unit for more than 20 minutes continuously. Take a 10-minute break in
between to prolong the life of the unit.
Open the cover, place the object to be cleaned inside the basket then in
the stainless steel tank.
Fill the tank with tap water. The liquid must cover the object that is to be
cleaned, but must not exceed "MAX" line.
Close the cover and plug in the power cord.
- 180 appears in the display window.
- This is the default time and is good for normal cleaning.
Select desired time setting
by pressing Set button:
180 s - 300 s - 480 s - 600 s - 90 s
Press On/O button to start the cleaning process. The blue LED light
lights up and the timer starts to count down to zero.
Note: You'll hear a buzzing sound which is normal.
When the timer has counted down to zero, the cleaning process stops
automatically and the display shows 000.
If you need to end the process ahead of time, press On/O button. If you
need to repeat the cycle or to increase the time, press Set button to select
desired time then press On/ O button again to restart it.
18
Werbung
