Bosch GWS 18V-7 Professional Originalbetriebsanleitung Seite 23

(11) Cover for cutting
(12) Mounting flange
(13) Grinding disc
(14) Disc brush (dia. 22.22 mm)
a)
(15) Disc brush (M14)
a)
(16) Cutting disc
a)
(17) Diamond cutting disc
(18) Clamping nut
(19) Quick-clamping nut
(20) Two-pin spanner for clamping nut/round nut
(21) Handle (insulated gripping surface)
(22) Grinding spindle
Technical Data
Angle Grinder
Article number
Rated voltage
A)
Rated no-load speed
Max. grinding disc diameter/rubber sanding pad
diameter
Grinding spindle thread
Max. thread length of grinding spindle
Restart protection
Run-out brake
Soft start
Weight according to EPTA-Procedure
B)C)
01:2014
Recommended ambient temperature during
charging
Permitted ambient temperature during opera-
D)
tion and during storage
Recommended rechargeable batteries
Recommended chargers
A) Rated no-load speed for the selection of appropriate application tools in accordance with EN IEC 62841-2-3. The actual no-load speed is
lower for safety reasons and according to production tolerances.
B) Depends on battery in use
C) Depends on protective guard and auxiliary handle in use
D) Limited performance at temperatures < 0 °C
Noise/Vibration Information
Noise emission values determined according to
EN IEC 62841-2-3.
Typically the A-weighted noise level of the power tool are: 85
dB(A); sound power level 93 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN IEC 62841-2-3:
Bosch Power Tools
(23) Hand guard
(24) Extraction guard for cutting with cutting guides
(25) Rubber sanding pad
a)
(26) Abrasive disc
(27) Round nut
(28) Cup brush
(29) Conical brush
(30) Diamond annular cutter
a)
(31) Open-ended spanner
a) Accessories shown or described are not included with the
3 601 JH9 0..
V=
-1
min
mm
mm
kg
°C
°C
GBA 18V... ≥ 4.0Ah
ProCORE18V...
Surface grinding (roughing):
a = 7.0 m/s
h
Disc sanding:
a = 3.5 m/s
h
Cut-off grinding:
a = 5.4 m/s
h
Grinding thin metal sheets or other materials that tend to easily vi-
brate with a large surface area can cause the noise emission value to
increase by up to 15 dB. Suitable, heavy damping mats can reduce
a)
a)
a)
a)
a)
a)
a)
a)
product as standard. You can find the complete selection of
accessories in our accessories range.
GWS 18V-7 GWS 18V-7
3 601 JH9 0..
18 18
11,000 11,000
100 115
M 10 M 14
22 22
●
–
●
2.1–3.1 2.2–3.2
0 to +35 0 to +35
–20 to +50 –20 to +50
GBA 18V... ≥ 4.0Ah
ProCORE18V...
GAL 18... GAL 18...
GAX 18... GAX 18...
GAL 36... GAL 36...
2 2
, K = 1.5 m/s ,
2 2
, K = 1.5 m/s ,
2 2
, K = 1.5 m/s .
1 609 92A 76N | (30.11.2022)
English | 23
a)
GWS 18V-7
3 601 JH9 0..
18
11,000
125
M 14
22
● ●
– –
● ●
2.3–3.3
0 to +35
–20 to +50
GBA 18V... ≥ 4.0Ah
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...