Mpow BH070A Benutzerhandbuch Seite 5

5. After pairing successfully, turn on the Bluetooth function
of the first smart device. Select the "BT 4807"and click
"connect".
6. Two smart devices will both connect with the Bluetooth
receiver at the same time.
Remark:
If you want to switch different smart device to listen
music, please pause the music of the first smart
device, and then play the music on the second smart
device, it will switch to the music of the second smart
device after a few seconds.
Playing music
1. Short press the multifunction button: Play/ Pause
the music.
2. Double press the multifunction button: Play the next
song.
3. Long press the multifunction button for about 1
second: Play the previous song.
NOTE:
Volume control functions must be controlled directly
by your audio device.
-06-
Automatic Connect
It will connect to the last connected smart device
automatically when turned on next time. (Please make
sure the Bluetooth function of your smart device is
turned on before turn on the receiver.)
Clear The Receiver's Pairing List
Power off the product first then long press the
multifunction button for about 8 seconds until the red
indicator light stays on for
1
second then goes off. It
will clear the pairing lists that have paired before.
Low Power Warning
When the device is in low power state, the red light
will flash, please charge it as soon as possible. During
charging, the red indicator will stay on, the red
indicator will go off after fully charged.
Do not use charger over 5V to charge the product it
may destroy the product.
-07-