Werbung
Verfügbare Sprachen
Verfügbare Sprachen
General safety instructions
Prior to use, please read the following instructions carefully and store them where they can
be found easily. If the product is to be given to another party, please pass on the
instructions to the future user.
The manufacturer shall not be liable for personal injury/material damage caused by improper
or incorrect use. In such cases, the warranty or guarantee will be invalidated as well.
Technical specifications
Input voltage:
Output voltage:
Current:
USB port:
General information
This product is designed for specific uses. We would like to state explicitly that this product
may not be modified and/or used in a manner not in keeping with its intended use.
Changes geared towards technical improvement may be made by the manufacturer without
prior notice and may not yet be included in the instruction booklet.
Tools required
The following tools are required for optimum installation:
Suitable power cables
•
Crimping pliers
•
Drill or hole saw
•
Cable shears and wire stripper
•
Phillips screwdriver
•
Insulation tape, if need be
•
A voltmeter or test lamp, if need be
•
12 V – 24 V
5 V
1 A / 3.1 A
2x USB Type A
6
Werbung
