Renkforce CR21E-ALU Bedienungsanleitung Seite 2

Operating instructions
Card reader "CR21E-ALU" USB3.0
Item no. 1170549
Intended use
The product can be connected to the USB port of a computer and is then intended for
reading and writing data on suitable memory cards.
This product complies with the statutory national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
Delivery content
• Card reader
• USB cable
• Operating instructions
Description of symbols
This symbol informs you about specific risks when handling, operating or
using the product.
The "arrow" symbol indicates special remarks and notes for operation.
Safety instructions
In case of damage caused by non-observance of these operating
instructions, the warranty gets void! We are not liable for any consequential
damage!
We are not liable for property damage or injuries caused by improper use
or non-observance of safety instructions! Such circumstances will void the
warranty!
• Unauthorized modifications and/or alterations to the product are not
permitted due to safety and approval reasons (CE). Do not open/dismantle
it!
• The product is intended for use in dry, indoor spaces only. The product
may not become moist or wet.
• This product is not a toy, keep it out of the reach of children.
• Do not leave packaging materials lying about, they may become a
dangerous plaything in the hands of children.
• Handle the product with care; impacts, blows or falling from even low
heights can cause damage.
Operation, connection
Connect the card reader to the USB3.0 port of your computer using the USB cable
provided. You need not turn off your computer for this step.
The power LED of the card reader lights up once the card reader has been connected
properly.
The operating system recognizes new hardware and installs the necessary drivers
automatically; they are part of the operating system.
If your computer does not feature a USB3.0 port, you may also connect the
card reader to a USB2.0/1.1 port, which will nevertheless not allow for fast
dater transfer.
Inserting/removing memory cards
Important!
In order to use SDXC memory cards with Windows XP operating system,
Windows XP requires an update. Only after that can the "exFAT" file system
of SDXC memory cards be supported.
Download the update from www.microsoft.com. Enter keywords such as
"exfat windows xp" into the search bar of your browser in order to find the
update.
When using Windows Vista you must have at least Service Pack 1 installed
in order to support SDXC memory cards through the card reader.
Later Windows versions support the "exFAT" file system of SDXC memory
cards directly (e.g. Windows 7 or later).
Insert a memory card into the respective slot of the card reader (see markings on the
card reader). While doing so, observe the correct direction of the memory card and
do not use any force!
It is not possible to use SD and micro SD cards simultaneously.
For that reason, do only insert either an SD card or a micro SD card into the
slot of the card reader.
In order to remove a memory card from the card reader (or in order to disconnect
the card reader from the computer), wait until all reading/writing operations on the
card have been completed. You may only then remove the memory card from the card
reader.
Disconnecting the memory card from the card reader (or disconnecting the
card reader from the computer) while reading/writing operations are still in
process can result in the corruption of data stored on the memory card and
might even require a new formatting of the memory card.
Reading/writing data on memory cards
A memory card inserted in the card reader will be integrated like a normal removable
storage drive. Use, for example, the Windows file manager to read (or to store) data on
the memory card, similar to the use of USB hard drives or USB sticks.
The maximum available speed for reading/writing data on the memory card depends
on the memory card used. When using slow memory cards or writing data on such
cards it is common that the data transfer rate is not higher when connecting the card
reader to a USB3.0 port compared to a conventional USB2.0 port.
Maintenance and cleaning
This product does not require maintenance. Maintenance or repairs may be carried
out by a professional only.
Use a clean, soft, dry cloth to clean the product. You can easily remove dust using a
clean, soft brush or a vacuum cleaner.
Do not use any aggressive, chemical or abrasive cleaning agents as these may cause
surface discoloration or even changes in the material.
Disposal
Do not dispose of the product with your household waste.
Please dispose of the device at the end of its service life in accordance with
legal regulations; e.g. return the device to a public collection point.
Technical data
Operating voltage............................... 5 V/DC (via USB)
USB standard...................................... USB3.0 (compatible with USB2.0/1.1)
Suitable memory cards ..................... SD/SDHC/SDXC, micro SD/ micro SDHC, CF, xD,
Ambient conditions ............................ Temperature: 0°C to +40 °C
Cable length ........................................ approx. 1 m
Dimensions (L x W x H) ..................... 105 x 60 x 15 mm
Weight .................................................. 115 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2014 by Conrad Electronic SE.
MS, MS Pro, M2
Humidity: 20% to 80% RH, non-condensing