KMS 01-01-07-2012 Technische Information Und Kalibrierungswerte Seite 5

Calibration values
•
At 3.75 volt:
•
At 1.25 volt:
When using a KMS ECU, these values must be set in the KMS ECU software.
See figure below for an example:
Engine-load 2' values for software setup
•
Min. value:
•
Max. value:
When using a KMS ECU, these values must be set in the KMS ECU software.
For use on lower pressure scale, see pressure table on next page. See
figure below for an example:
KMS pressure sensor 200 kPa
-01-07-2012
159 kPa
59 kPa
15
250
EN — NL — DE
kms.vankronenburg.nl
EN