Moes Emergency Button Benutzerhandbuch Seite 5

Activating Network Configuration Mode
1. Powering on the Product:

Insert a thin blade or coin into the slot on the battery cover, rotate it
counterclockwise to open the cover.

Remove the battery insulation film to power on the product, and then close
the battery cover securely.
2. Initiating Network Configuration:

Utilize a pin to long-press the button as depicted in the image until the
green indicator light flashes rapidly. Release the button, allowing the sensor
to enter the network configuration state.
3. Ensuring Proximity to the Gateway:

During network configuration, ensure the device is positioned as close as
possible to the Gateway.
4. App Integration Process:

Access the "My Home" page within the TuyaSmart App, navigate to the
added gateway, and select the option to add a sub-device. Follow the
prompts provided within the App for further instructions.
5