Herunterladen Diese Seite drucken

WolfPack KWSD08 Bedienungsanleitung Seite 21

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 41
charger increases the risk of electric shock.
Recharge only with the charger specified by the manufacturer. A charger that is suitable for
one type of battery may create a risk of fire when used with another battery.
Do not charge other batteries. The battery charger is suitable only for charging our lithium
ion batteries within the listed voltage range. Otherwise, there is a danger of fire or explo-
sions.
Keep the battery charger clean. Contamination may cause an electric shock hazard.
Check the battery charger, cable and plug each time before using. Do not use the battery
charger when defects are detected. Do not open the battery charger yourself and have it
repaired only by qualified personnel using original spare parts. Damaged battery chargers,
cables and plugs increase the risk of electric shock.
Do not operate the battery charger on easily inflammable surfaces (e.g. paper, textiles, etc.)
or in combustible environments. There is a danger of fire due to the heating of the battery
charger during charging.
Under harsh conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid comes into contact with eyes, please also seek
medical help. Liquid ejected from the battery may cause irritation or burns.
Do not open the battery yourself. There is a danger of a short circuit.
Protect the battery against heat sources; these can include continuous solar irradiation or
fire. There is a danger of explosion.
Do not short-circuit the battery. There is a danger of explosion.
In the event of damage or improper use of the battery, vapours may be emitted. In the event
of any complaints, provide fresh air and consult a physician. The vapours can irritate the
respiratory system.
PRODUCT DESCRIPTION
Read all safety warnings and instructions. Failure to follow the warnings and instructions may
result in electric shock, fire, and/or other serious injury.
INTENDED USE
The machine is intended for screwdriving and drilling in wood and plastic. It is not intended for
professional use.
TECHNICAL SPECIFICATIONS
ITEM NUMBER
Model number
Voltage
Battery capacity
Unloaded speed (RPM)
Torque (max.)
Chuck size
Charging time
011870
KWSD08
4V
1.300 m1Ah
200 RPM
3Nm
1/4"
3 – 5 uur
21

Werbung

loading

Diese Anleitung auch für:

07021675