Kenwood EasyWeigh KAP00.000GY Bedienungsanleitungen Seite 8

Only use the appliance for its intended domestic use. Kenwood will not
accept any liability if the appliance is subject to improper use, or failure to
comply with these instructions.
Cleaning
Do not immerse in water. Attachment not suitable for use in a dishwasher.
Wipe with a damp cloth, and dry thoroughly.
Do not use abrasive or chemical agents to clean.
Refer to your main Kitchen Machine instruction book for additional safety
warnings.
Key
Scale
1
Fixing Screw
2
Display
3
'on/zero' Touch Pad
4
kg/lb Touch Pad
5
Load Cell Feet
6
Battery Compartment
7
Battery Installation
Refer to Illustrations
IMPORTANT
Before fitting or replacing batteries
ensure that the scale attachment is
removed from your Kitchen Machine.
1 Unclip the battery cover on the
underside of the scale.
2 Insert 3 x AAA batteries into the
battery compartment in the correct
orientation - refer to illustration D.
3 Replace the battery cover.
Note - During use, if the battery symbol
' ' appears in the display, it means that
battery power is low and the batteries
should be replaced.
C E
–
To Fit Your Scale
Attachment
Refer to Illustrations
IMPORTANT
Before fitting the scale attachment,
ensure that the bowl and fixing screw
are removed from your Kitchen
Machine.
1 Place your kitchen machine onto the
scale attachment. Note: the edges of
your kitchen machine should line up
with the edges of the attachment.
2 Insert the fixing screw into the hole
in the pedestal and turn clockwise to
secure in place.
To Weigh
Refer to Illustrations
IMPORTANT
Ensure that the load cell feet of the
attachment are clean and dry before
use.
Always place the assembled unit on
a clean, dry and flat surface prior to
weighing.
1 Fit the bowl, turn clockwise to lock.
2 Press the ON/ZERO touch pad to
switch the scale on.
3 When the display shows '0', place the
items to be weighed into the bowl.
The weight will appear on the display.
3
F H
–
I J
–