Medion LIFE X14339 Kurzanleitung Seite 83

4.7.2. Network/Internet settings
Next, you can establish a connection to the network/Internet.
All available WLAN networks are displayed directly.
 Use the  buttons to select the required WLAN network and press
the required password using the direction buttons , then select the return key
press to confirm. The connection will then be established.
OK
 To establish a LAN connection using a network cable, select
essary, then enter the required password using the direction buttons , then select the
return key and press
 Select
OTHER NETWORK...
specify the name of the network. If necessary, then enter the required password using the direc-
tion buttons , then select the return key
will then be established.
 Depending on the country selected, it may now be necessary to specify a password and parental
control settings.
4.7.3. Google sign in
You can now sign in using your Google account to optimise your device with your apps, films and
recommendations etc. You can do this using your smartphone/computer by going to androidtv.
com/setup and entering the six-digit numerical code for your device. This will be displayed as soon
as you select
USE YOUR PHONE OR COMPUTER
Make sure that your smartphone/computer and the TV are connected to the same
WLAN network during setup.
Select
USE YOUR REMOTE
email address to sign in.
If you do not want to sign in to Google, select
4.7.4. Terms of use and other default settings
At this point, you will be prompted to accept the terms of use, privacy policy and Google Play terms
of use. This is essential if you intend to make use of Google services.
 Read through carefully and select
 If you would like to allow Google to access your location in order to optimise the functionality of
certain apps and platforms, select
forehand, press
OK
 If you would like to allow Google to access your usage data, select
Otherwise, select this option beforehand, press
 Optional (depending on country selection):
You will now be asked to enter a 4-digit password
Make a note of the password and write it down if necessary. If you have forgotten
your password, perform the initial installation again and set a new password.
10
Select your Wi-Fi network
You can also connect an Ethernet cable to connect to the Internet
to confirm. The connection will then be established.
OK
if you want to establish a connection with another network. Then
and press to register the remote control on the TV. Then enter your
OK
ACCEPT
ACCEPT
and deactivate this function.
USE ETHERNET
and press
and press .
OK
and press to continue setup.
SKIP OK
to confirm and then press
now and press . Otherwise, select this option be-
OK
and deactivate this function.
OK
Wi-Fi
Other network...
Use Ethernet
Skip
. If necessary, then enter
OK
and press
OK
to confirm. The connection
OK
.
OK
now and press
ACCEPT
and
. If nec-
.
OK