Herunterladen Diese Seite drucken

Instant Pot DUO CRISP Serie Bedienungsanleitung Seite 15

Werbung

Overview of Pressure Control Features
Anti-Block Shield
The anti-block shield prevents food particles from coming up through the steam
release pipe, assisting with pressure regulation.
As an integral part of product safety, the anti-block shield must be installed before
use and cleaned frequently.
Remove the Anti-Block Shield
Grip the lid like a steering wheel and use your thumbs to press firmly against the
side of the anti-block shield (pressing towards the side of the lid and up) until it
pops off the prongs underneath.
Install the Anti-Block Shield
Place anti-block shield over prongs and press down until it snaps into position.
Do not attempt to operate the pressure cooker without the anti-block shield installed.
Illustrations in this document are for reference only and may differ from the actual product.
Always refer to the actual product.
28
Remove
Install
Overview of Pressure Control Features
Sealing Ring
When the pressure cooking lid is closed, the sealing ring
installed on the underside of the lid creates an airtight
seal between the lid and the cooker base.
The sealing ring must be installed before using the
cooker and should be cleaned after each use.
Only 1 sealing ring should be installed in the lid when
using the cooker. Use one for sweet dishes and one
for savoury.
Sealing rings stretch over time with normal use.
As an integral part of product safety, the sealing ring
should be replaced every 12–18 months or sooner
if stretching, deformation or damage is noticed.
Remove the Sealing Ring
Grip the edge of the silicone and pull the sealing
ring out from behind the circular stainless steel sealing
ring rack.
With the sealing ring removed, inspect the rack to
ensure it is secured, centred and an even height all the
way around the lid. Do not attempt to repair a deformed
sealing ring rack.
Install the Sealing Ring
Place the sealing ring over the sealing ring rack and
press it into place. Press down firmly to ensure there
is no puckering.
When installed properly, the sealing ring is snug behind
the sealing ring rack and should not fall out when the lid
is turned over.
Instant
Tip: Silicone is porous, so it may absorb strong aromas and certain
flavours. Keep extra sealing rings on hand to limit the transfer of those aromas
and flavours between dishes Visit
CAUTION Always check for cuts, deformation and correct
installation of the sealing ring prior to cooking. Do not
use a stretched or damaged sealing ring. Only use authorised Instant
Pot sealing rings. Failure to follow these instructions may cause food
to discharge, which may lead to personal injury or property damage.
Illustrations in this document are for reference only and may differ from the actual product.
Always refer to the actual product.
Remove
Install
Incorrect
our store
to color code your cooking.
29

Werbung

loading

Diese Anleitung auch für:

Duo crisp af 6Duo crisp af 8