6. PREPARATION
6.1 Connecting the radio to loudspeakers
Use the loudspeaker cables supplied to connect the radio to the
loudspeakers.
GB
NOTE!
The radio must not be connected to the power supply when connecting it to
the speakers. Make sure that you insert the strands of the speaker cables
correctly into the speaker terminals and that the wires of the cable braid of
the two cables do not touch each other.
1. Screw on the speaker terminals
2. Insert cable
3. Screwing the loudspeaker cable
1
2
3
Speaker connection diagram
-
+
-
+
27
DABMAN i310 CD