Herunterladen Diese Seite drucken

Dreamland R9001 Bedienungsanleitung Seite 8

Hiezdecke

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 32
AUTO-OFF FUNCTION
The underblanket has an automatic switch-off function which is activated after 1, 3 or
EN
9 hours. When switched on, the control unit automatically sets itself to 1 hour on the
auto-off timer and LED 1h lights up in green (10). To set a different auto-off time, press
the timer selector button (6) and select the desired timer. Each time the auto-off time is
reset, the timer starts from zero. When the time has elapsed, the underblanket switches
off and the standby LED (9) lights up in blue.
NOTE: Should the power supply accidentally be interrupted during use, when
the control unit is switched back on it will maintain the temperature and timer
settings in use previously and the timer counter will start from zero.
NOTE: So that the display light does not bother users during the night, the
light intensity reduces around 15 seconds after any button is last pressed.
Similarly, the standby LED becomes less bright 15 seconds after it is activated.
SWITCHING OFF
Switch the underblanket off by pressing the ON/OFF button (7) and remove the plug from the
socket (3).
The underblanket is washable. Check the washing symbols on the label to ensure it is
washed correctly.
WARNING! Always disconnect the appliance from the mains
and disconnect the control connector from the underblanket
before cleaning or performing maintenance.
BEFORE WASHING
• Take the plug of the control unit cable out of the mains socket (3).
• Press the grip levers at the sides of the control unit connector (2) to remove the control
unit connector from the underblanket connector (1).
MACHINE WASHING
• The underblanket can be cleaned in the washing machine at 30°C, on a delicate cycle.
• Use only the delicate cycle for spinning. DO NOT make an additional spinning cycle.
DRYING IN THE TUMBLE DRYER
• The underblanket can be dried in a tumble dryer on a delicate cycle, but at the end of
the drying cycle it must be air-dried to allow it to dry completely.
7
CLEANING AND MAINTENANCE

Werbung

loading

Diese Anleitung auch für:

R9014