Herunterladen Diese Seite drucken

Dreamland R9001 Bedienungsanleitung Seite 6

Hiezdecke

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 32
WARNING! DO NOT crease the appliance by placing items
on top of it during storage.
EN
WARNING! For use, cleaning, maintenance and storage of the
appliance, please follow the instructions specified in the
corresponding chapters.
• Persons with a pacemaker must not operate this appliance when they are in bed:
it can be used to pre-heat the bed but it must be switched off and disconnected
from the mains supply before going to bed.
DO NOT use the appliance with wet hands or damp feet.
DO NOT pull the power cable or the appliance itself to remove the plug from
the socket.
DO NOT pull or lift the appliance by the supply cord.
DO NOT expose the appliance to humidity, to the effects of weather (rain,
sun, etc.) or to extreme temperatures.
• If the appliance is faulty or malfunctions, switch it off and do not tamper with it.
Contact an authorised technical service centre for any repairs.
DO NOT use this appliance to warm animals.
DO NOT tuck in.
• See the external packaging for the characteristics of the appliance.
POSITIONING THE UNDERBLANKET
WARNING! The electric blanket must only be placed between the
mattress and the flat sheet and not on top of persons in bed.
IMPORTANT: The underblanket only works efficiently if it is positioned inside
the bed and covered with a bed sheet, covers or quilt.
• Spread the underblanket (4), starting from the bottom, directly on the mattress, with
the connector (1) side facing downwards.
• Pull the elasticated strap over and under the top of the mattress. Attach the elasticated corner
straps over the bottom corners of the mattress.
• Make sure the underblanket is always spread out smoothly and that there are no creases.
• Make the bed, laying the mattress cover and/or the first sheet on top of the underblanket.
Place the second sheet and the normal blanket or duvet on top.
CONNECTING THE CONTROL UNIT
• Insert the control unit connector (2) in the underblanket connector (1) to connect the
control unit to the underblanket.
5
USE

Werbung

loading

Diese Anleitung auch für:

R9014