Kruger & Matz KM2015 Bedienungsanleitung Seite 13

Owner's manual
• To assign a set frequency to one of the lower six buttons, press and hold the selected
program button.
• A separate set of saved radio stations can be assigned to each FM band (FM1, FM2, FM3).
• To change the band, press the BAND button. Each press will switch to another band.
Playing from a microSD card or USB drive
When you connect a USB drive (e.g. a flash drive) or a microSD card (the card locks in the
socket, insert it with pins facing the display), the radio will automatically switch to the
correct mode. If this does not happen, switch the mode manually using the MODE button.
• Press the pause button to pause or resume the song.
• Press the repeat button to change the repeating mode: repeating a single song (RPT
ONE), repeating songs from a folder (RPT DIR), repeating all songs (RPT ALL). If there is
an RPT message on the display, one of the first two modes is active (the default
repetition mode is repeating all songs and is not indicated by an RPT message).
Playing from AUX
1. Connect the 3.5 mm plug of the external device to the AUX socket.
2. Change the mode to AUX IN using the MODE button.
3. Use the external device to control the playback of the music.
Bluetooth playback
EN
1. Press the MODE button to change the playing mode to BT. A "BT OFF" message will
appear on the display, indicating that the radio is ready for pairing.
2. Turn on Bluetooth on your phone and search for nearby devices. Connect to the CAR BT.
After a while, the message "BT LINK" will appear on the display, indicating that the
connection has been established.
3. You can control the music played from the phone on the radio. Start the music player
24
on your phone. From the radio you can scroll through songs using the previous and next
track buttons, and pause and resume playback using the pause button. Bluetooth music
control can only be done in BT LINK mode.
4. When your phone is connected with the radio, the call management function is also
activated. When you have an incoming call, the music will stop and a phone number will
appear on the display. To answer, press the pick up call button. To end or reject the call,
press the end call button.
5. If your phone is paired with the radio, simply turn on Bluetooth on your phone and make
sure that your phone connects to the radio. The radio does not need to be switched to
BT LINK mode. When the connection is established, the message "BT LINK" will appear
on the radio, and the music in the selected mode will continue.
Steering wheel controls
Steering wheel controls require proper connection of buttons from steering wheel to the
radio (each car model can have different way of connection).
1. Open the main menu and go to the CAN menu.
2. Select radio function and press the 5 button.
3. Press a button on steering wheel with corresponding function.
4. Repeat these steps for each function.
5. After assigning every function, select and press the OK button.
Owner's manual
EN
25