Ffeuk FIRERAY 50RZ Bedienungsanleitung Seite 9

8. Connection and Configuration Settings.
8.1. Field Wiring.
The zone wiring is accessed through the back plate of the Detector Head (See Fig 4). The small 2-pin
connector on the left is not used.
8.2. DIP Switch Settings.
Access to the configuration settings is through the back plate of the Detector Head (See Fig 4).
Switch 8 enables (on), or disables (off) the series Schottky diode for fault indication (default is enabled).
8.3. Typical Single Zone Wiring.
0044-023-01 14.11.08
+
8
+