Veikk VK1560 Benutzerhandbuch Seite 7

Display Connection
1. Connect the end of USB cable to computer.
2. Connect the other end of USB cable to VK1560.
3. Connect one end of HDMI cable to computer.
4. Connect the other end of HDMI cable to VK1560.
5. Plug the power cable into power outlet.
6. Plug the other end of the power adapter into VK1560 power port.
Note 1: We recommended you insert the VEIKK USB cable to the host USB port of your
computer. You may use a USB hub with and attached external power supply to
adequately power your VEIKK if needed.
Note 2: Make sure your computer supports multiple monitors. Check if your computer
has extra HDMI ports. If your computer has an independent video card, please use the
HDMI ports there.
Note 3: If there isn't any input signal, it means the table doesn't receive HDMI video
input. Please reconnect the HDMI cable or change another HDMI cable or change
another computer to have a try.
7
USB Cable
HDMI Cable