Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Attach log dog assembly to track as shown below with the 2 M8x20mm bolts and nuts provided. Note that
there are various locations along the track where this assembly can be bolted. Depending on how many
track sections are being used, select a log clamp position that will secure the log firmly against the log
supports.
Insert log supports into track cross supports and secure with "T" handles as shown in the picture below.
The "T" handle threads should be coated with grease. The sawmill includes two sets of log supports – a
short set and a long set. The longer set is ideal for larger logs and the shorter set is ideal for small logs and
square cants.
Werbung
