Juskys Lyon 28961 Gebrauchs- Und Montageanleitung Seite 16

8. Store
NOTICE
Damage to the product due to incorrect
storage.
►Unplug the power supply unit from the
power outlet if it will not be used for a
long time.
►Protect the product from dust and mo-
isture.
►Store the product assembled and upright
or disassembled afterwards in a dark,
cool, dry and well-ventilated place.
►Do not place any objects on the pro-
duct because of deformations that
may occur.
9. Cleaning and maintenance
9.1 Cleaning the bed
WARNING
Danger to life due to electric shock.
Damaged cables can cause short circuit,
re and electric shock.
►Disconnect the power supply unit from the
power outlet before cleaning and before
transport.
►Do not clean the electronics with damp
cleaning agents
NOTICE
Damage caused by incorrect cleaning
agents.
►Check the compatibility of the clea-
ning agent with the surface on an in-
conspicuous area.
►Use only cleaning cloths and soft brus-
hes.
►Remove dust and light dirt with a damp cloth or a
soft brush.
►Use a mild, non-fammable and ood-sae clea-
ning agent or a cloth dampened with water for
heavy soiling. Regular maintenance increases
the safety and longevity of your product.
►Check the attachment parts and screws re-
gularly for tightness and tighten the screws if
necessary.
►Replace defective or damaged parts imme-
diately.
16
9.2 Changing the battery of the remote control
1. Place the remote control on a table with the
keys facing down.
2. Hold the remote control with one hand while
gently pressing the release tab in the direction
of the pull groove with the thumb of your other
hand, for example.
3. Hold your index nger on the pull groove so
that you can pull out the tab and the release
tab is pressed on.
4. Replace the battery with an identical one.
5. Close the battery compartment again.
10. Repairing
NOTICE
Damage due to improper repair.
►Only have repairs carried out by quali-
ed personnel.
►Only use spare parts approved by the
manufacturer.