Creality CV-01 PRO Benutzerhandbuch Seite 4

Wear goggles to prevent vision damage arising from exposure to the laser spot
•
during laser engraving operation,
It is advisable to run the machine under well ventilated condition as laser
•
engraving may generate small amount of fume or gas;
Children under 10 years old are not allowed to run the machine without adult
•
presence, which otherwise may lead to personal injury
Put in place fire extinguishers in case of use, which shall be regularly checked. It
•
is prohibited to keep the machine unattended while it is running
Users should comply with the laws and regulations of the corresponding
•
countries and regions where the equipment is located (used), abide by
professional ethics, pay attention to safety obligations, and strictly prohibit the
use of our products or equipment for any illegal purposes. Creality will not be
responsible for any violators' legal liability under any circumstance.
Introduction
1) Gradienter
2) X-axis assembly
3) Y-axis assembly
4) Microswitch
5) Focusing bar
6) Control Box assembly
7) Laser module
4