Werbung
Technical Specifications
Technical Specifications
MB210
System Performance
Frequency Response (±3 dB)
Frequency Range (–10 dB)
Nominal Coverage Pattern (H × V)
Recommended High-pass Filter
Crossover
Power Handling, long-term continuous
Power Handling, peak
Sensitivity (SPL / 1 W @ 1 m)
Calculated Maximum SPL @ 1 m
Calculated Maximum SPL @ 1 m, peak
Transducers
Low Frequency
Nominal Impedance
Physical
Enclosure Material
Finish
Grille
Environmental
Connectors
Suspension/Mounting
Dimensions (H × W × D) – millimeters
Dimensions (H × W × D) – inches
Net Weight (loudspeaker only)
Net Weight (with U-bracket)
Shipping Weight
Accessories
Footnotes
1.
Frequency response and range measured on-axis in anechoic environment with recommended bandpass and EQ.
2.
Bose Professional extended-lifecycle test using pink noise filtered to meet IEC268-5, 6-dB crest factor, 500-hour duration.
3.
AES standard 2-hour duration with IEC system noise.
4.
Sensitivity measured in anechoic environment with recommended bandpass and EQ.
5.
Maximum SPL calculated using sensitivity and power ratings, exclusive of power compression.
18 • English
45 to 180 Hz
1
37 to 270 Hz
Omni-directional below 200 Hz
45 Hz with 24-dB/octave filter
80 to 200 Hz (requires active crossover in DSP)
Bose Professional Extended Lifecycle
Free Field
90 dB
4
117 dB
5
123 dB
2 × 10-inch, high-excursion woofers
8 Ώ
Baltic birch plywood
Polyurethane coating, black or white
Powder-coated perforated steel
Indoor only
2 × Neutrik® NL4 with 4-pin Euroblock, all wired parallel
3 × M8 threaded inserts for U-bracket (per side)
291 × 685 × 482 with U-bracket
11.5 × 27.0 × 19.0 with U-bracket
18.6 kg (41.0 lb)
21.8 kg (48.0 lb)
27.2 kg (59.9 lb)
Included steel U-bracket and 4 × adhesive-mounted rubber ground-stack feet
Test
2
500 W
2000 W
Half-space
96 dB
123 dB
129 dB
BoseProfessional.com
AES Transducer Test
3
625 W
2500 W
Free Field
Half-space
90 dB
96 dB
118 dB
124 dB
124 dB
130 dB
MB210/MB210-WR • Installation Guide
Werbung
