Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTRUCTIONS
Installation
The USB receiver is located inside the mouse. Remove the battery compartment cover and
remove the USB receiver. Replace the cover.
Insert the USB receiver into the USB-A port of your computer.
The mouse is installed automatically so you can quickly and comfortably operate the mouse.
Once the cursor appears on the monitor, the mouse is ready to use.
Sensor sensitivity setting
Press the DPI button repeatedly to adjust the sensor sensitivity. The default value is 1,600 DPI.
If you select 1,000 DPI sensitivity, the red LED on the left side of the center wheel flashes once;
if you select 1,600 DPI sensitivity, it flashes twice; if you select 2,400 DPI, it flashes three times.
CLEANING
Keep the wireless mouse clean. Turn the switch to the "OFF" position before cleaning.
Use only a dry, clean cloth for cleaning. Do not use harsh cleaners, solvents, gasoline or other
similar substances. Never wash the wireless mouse with water and do not immerse it in water.
If you will not be using the wireless mouse for an extended period of time, set the power
switch to OFF.
8
ENGLISH
Werbung
Inhaltsverzeichnis
