Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. Maintenance
In the event that the product is defective or damaged, contact the reseller from whom you pur-
chased the fixture.
WARNING
• Do not clean the LED fixture with detergents, abrasives, and/or any other aggressive substances,
such as solvents, acetone, alcohol, alkaline cleaners, windows cleaners, and similar.
• Regularly check the power cables of the fixture to ensure it is undamaged and safe to use.
• Check the product regularly for the build-up of dust and dirt. Clean the product if necessary.
• To limit degradation, avoid touching the diodes with your hands, even in a powered-off state.
CAUTION
• Always switch off the main voltage before commencing installation and/or maintenance work.
• High voltage: risk of fire & risk of shock.
• Do not connect or disconnect the LED fixture under load.
• Don't touch. Fixture reaches high temps while in use. Always wait 20 - 30 minutes for the fixture
to cool down.
• Never open or disassemble the product. It will void the warranty and will break the water-tight
seal.
• The fixture and power supply are UL 8800 rated but are not designed to be submerged in water.
CLEANING INSTRUCTIONS:
When cleaning, make sure you have unplugged the LED fixture and allow to it cool to room
temperature. Do not open the retaining clips when cleaning. The LED fixture can be cleaned with
a feather duster or a soft damp cloth. You should plug in the lighting fixture after it has been
completely dried.
EN
ES
FR
IT
DE
7
Werbung
