Description; Insert Tools And Accessories - Hilti SF 4000-A Bedienungsanleitung

2. Description

The SF 4000-A is a battery-powered drywall screwdriv-
er with automatic (jet) coupling designed for use by pro-
fessional drywall installers. For optimum efficiency and
comfort in use, we recommend that the tool is held in
line with the forearm (in-line grip)
ing air is drawn in through the slots
from the tool through the air exit
for use by both right- and left-handed users. The ergonom-
ic, rubber-padded grip reduces fatigue and ensures that
the tool can be held securely.
The following items are supplied: electric screwdriver
with Phillips no. 2 bit and magnetic bit holder, 2 SFB 180
or SFB 185 batteries, C7/24 charger, 2 operating instruc-
tions, packed in a plastic toolbox. Alternatively, the elec-
tric screwdriver may be supplied with a Phillips no. 2 bit
and magnetic bit holder, operating instructions, packed
in a cardboard box.
Use as intended
Main application
Drywall panels on metal framing (≤ 0.88 mm)
Drywall panels on metal framing (≤ 2.25 mm)
Fastening metal framing parts to each other
(max. fastened thickness 2.50 mm)
Drywall panels on timber framing
Drywall panels on metal framing (≤ 0.88 mm)
and timber framing
Particle board on timber framing
The tool can also be used with the SMI 55 magazine and corresponding magazined screws for the intended
applications. Please refer to the operating instructions for the SMI 55 drywall screw magazine.

3. Insert tools and accessories

– Depth gauge, alu 75 mm S-GDA 11×75
– Long bit holder, magnetic S-BHP 75M
– Phillips no. 2 bit
– Belt hook
– Scaffolding hook
– SFB 180 or SFB 185 battery
– Toolbox
– Belt adaptor SFB 180 / 185 BAP
12
Printed: 07.07.2013 | Doc-Nr: PUB / 5070680 / 000 / 00
Requirements to be met by users
● The tool is intended for professional use.
● The tool may be operated, serviced and repaired only
by authorised, trained personnel. This personnel must
be informed of any special hazards that may be encountered.
● Proceed carefully and do not use the tool if your full
attention is not on the job.
. The motor cool-
and is expelled
Main features of the tool
. The tool is suitable
– Vibration-absorbing grip (synthetic rubber)
– Smooth speed control
– Gearing and clutch with permanent lubrication
– Automatic cut-out carbon brushes
– Coupling with jet function
– Scaffolding hook and belt hook (pivoting and remov-
– Lockbutton for sustained operation
– Forward / reverse rotation
– Adjustable depth gauge
– Cooling air guidance (air exit)
Type of screw
Drywall screw with needle point, type S-DS01
Drywall screw with drill point, type S-DD01
Drywall screw with drill point, types S-DD02 and
S-DD03
Drywall screw with needle point, type S-DS03
Drywall screw with needle point, type S-DS14
Drywall screw with needle point, type S-DS03
able)