Herunterladen Diese Seite drucken

be cool eCBM-Hi1 Original Bedienungsanleitung Seite 59

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Battery
Battery charging
Please follow the steps below to charge the battery:
1. Connect the power supply unit included in the scope of delivery
to the mains and to the input of the battery pack
2. The charger lights up red during charging
3. When the indicator light on the power pack changes to green,
the battery is fully charged
4. Disconnect the connection between the battery and the power
supply unit
Loading times
36V/20 Ah battery: ~ 8 hours
36V/14 Ah battery: ~ 6 hours
Remove the battery from the bicycle if you are carrying out maintenance
work or work on the electronic controls.
The life and performance of a battery depends on its age, care and how
often it has been used.
Compared to other battery models, lithium ion batteries have a very low
self-discharge rate. Charge the battery to at least 80% of its capacity if it is
not used for more than 30 days. It is better to charge the battery to 100%
every 90 days to protect the function of the battery.
Please note that a deeply discharged battery is irreparably damaged and
must be replaced at the owner's expense. For this reason, the battery
should never be completely discharged, even during operation!
NOTE!
NOTE!
• Do not use chargers that are not suitable for the battery type.
• Do not short-circuit the charger
• Only charge the battery if it does not show any damage
• Do not damage the battery mechanically (disassemble, deform,
puncture).
• Do not heat and/or burn above the permissible temperature.
• Keep batteries away from children
• Always store batteries in a cool and dry place
Do not expose the battery or the charger to direct sunlight.
Do not charge other devices with the supplied power supply.
Cleaning the bicycle with a water hose, high-pressure cleaner or
steam jet is prohibited. The penetration of water into the electrics,
the battery or the drive can destroy the devices.
WARNING!
WARNING!
WARNING!
WARNING!
59

Werbung

loading

Diese Anleitung auch für:

Emtb-pro1Ecbw-hi1