Herunterladen Diese Seite drucken

be cool eCBM-Hi1 Original Bedienungsanleitung Seite 54

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Before the first ride
Observe the chapter "Battery" and "Charging the battery" to ensure
correct handling of the battery.
Do not park your bike in the blazing sun.
The weight distribution of your Be Cool e-bike differs significantly
from conventional bikes without drive. Your Be Cool bicycle is
significantly heavier than a bicycle without drive, which makes it
more difficult to lift, push, carry or park the bicycle. This should also
be taken into account when loading the bicycle into a vehicle or when
attaching it to a bicycle carrier.
Always be aware that the brakes on your bicycle are always stronger
than the drive. If you have problems with the drive (e.g. because the
drive is dragging before a bend), brake your bike carefully.
ATTENTION!
ATTENTION!
ATTENTION!
ATTENTION!
Not all bicycles are equipped with a parking support. Therefore, make
sure that it stands securely when parked and is secured against falling
over. If your bicycle falls over, damage may occur.
Before each ride
Your Be Cool bike has been checked several times by the manufacturer
during production and in a subsequent quality control. Since changes in
the function of the bicycle may occur during transport or other persons
may have made changes to your bicycle during a standstill period, we
recommend checking the following points before riding again:
1. Are the thru axles, quick-releases or screw connections on the front
and rear wheel, seat post and other components correctly locked?
2. Are the plug connections on the battery, the board computer or on
the control unit and drive correctly connected?
3. Is your battery fully charged? Please make sure to fully charge the
battery after every ride (e.g. when there is less than 50% remaining
charge). Although lithium-ion batteries no longer have a memory
effect, they can be damaged by deep discharge. The service life of
the battery is also significantly shortened if it is left empty.
4. Is the battery firmly seated in its holder and is it properly locked?
Please do not ride your bicycle if the battery is not properly seated
and locked in its holder.
ATTENTION!
54

Werbung

loading

Diese Anleitung auch für:

Emtb-pro1Ecbw-hi1