Replacing The Uv-C Lamp - Progenion PRO360S-IUVH Bedienungsanleitung

REPLACING THE UV-C LAMP

1. Remove the HEPA Filter.
2. At the location of the arrows, remove the screws with a PH2 crosshead
screwdriver.
3. Gently pull the protective cover a quarter turn towards you.
4. Rotate the UV-C lamp 90 degrees and replace the lamp.
When placing the new lamp, use a soft cloth and turn the lamp back a quar-
ter turn.
5. Put the protective cover back in place and press it firmly.
Place the 4 screws back in the same indicated spot (image 2)
and tighten them.
2.
3.
5.
4.
8