EuroLite LED PSU-24V/10 DC Bedienungsanleitung Seite 22

Red dimmer
Green dimmer
Blue dimmer
Flash
Mode select
SOUND
Sensitivity select
MODE
Dreaming mode set
AUTO
Jumping mode set
RUN
Speed set
MODE
STATIC LED tube select
COLOR
SELECT
MODE
Color select
Flash
Display
on/off
OTHER
Display
MODE
normal/inversed
Initialization
mode
1. Manual dimmer color mode
Press"MODE"button, select the manual dimmer color mode. There are three modes in the sound active
program mode.You can select them by pressing the"SET UP" button.
1) LED tube select mode
Press"SET UP"button, select the LED tube select mode. At this time, the four digital tube displays "
~ ", then press"UP"or "DOWN" button to select the LED tube. When"
means that you can set the dimming rate for all the LED tubes. When"
means that you can set the dimming rate for the corresponding single LED tube. For example:
represent the LED tube 1 and so on.
2) Manual dimmer color select
Press"SET UP"button, select the manual dimmer color select mode . At this time,the four digital tube
displays red "
" ~ ", blue "
255.
3) Flash speed select
Press"SET UP"to choose the flash speed select mode. At this time, the four digital tube displays
" ~ ". Press"UP" or "DOWN" button to select the flash speed 00-15,00 is flash off, 01 is the
slowest flash speed, 15 is the fastest flash speed.
2. Sound active mode
Press"MODE"button,select the sound active program mode. There are two modes in the sound active
program mode. You can select them by pressing the "SET UP" button.
1) Sound active program mode select
Press"SET UP"button until the four digital tube displays "
select the sound active program mode 1-24 under this mode.
2) Sensitivity select mode
Press"SET UP"button until the four digital tube displays "
select the sound active the sensitivity 1-8. 1 is off sound-active, 2 is the lowest sensitivity, 8 is the highest
sensitivity.
~ ", press the "SET UP" again to choose different color, green
~ ", then press "UP" or "DOWN" button to set the dimming rate 0-
Adjust the intensity of the red color
~
Adjust the intensity of the green color
~
Adjust the intensity of the blue color
~
~ Adjust the flash speed,
off,
Select the 24 built-in sound active mode
~
Adjust the sensitivity of the sound-active,
~
is the lowest level,
highest level
Select the 24 built-in dreaming mode
~
Select the 24 built-in jumping mode
~
Adjust the speed of the dreaming/jumping
~
mode
/ is to select static color of all the
~ LED tubes,
static color of the corresponding single
LED tube
Select the eight static colors
~
~ Adjust the flash speed,
off,
LED digital tube display always on
LED digital tube display off
LED digital tube display normal
LED digital tube display inversed
Initialize the unit at the extra factory setting
~
~
22/27
is flash
is slowest, is fastest
~ is to select
is flash
is slowest, is fastest
" is displayed
~ " is displayed
", then press"UP" or "DOWN" to
", then press "UP" or "DOWN" to
00065031.DOC, Version 1.0
is the
/