Sonoff DW2-RF Montageanleitung Seite 7

SONOFF TECHNOLOGIES
3. Add sub-devices
Connect the Bridge before adding the sub-device.
Access the eWeLink APP and select the Bridge, tap "Add" to select the alarm, and a
"Beep" means the Bridge enters the pairing mode. Then seperate
than 20 mm from the transmitter
pairing is complete
If the addition failed, move the sub-device
Install the
1. Tear off the protective
2. Try to align the mark line on the magnet with that on the transmitter
3. Install them in the opening
CO., LTD
Add
until the LED indicator
when you hear "Beep Beep".
device
film of the 3M adhesive.
and closing
>20mm
stays on for 1 to 2s, and the
closer to the Bridge and try again.
area separately.
6
English
the magnet for more
during installation.