Herunterladen Inhalt Inhalt Diese Seite drucken
Sonoff SNZB-04 Benutzerhandbuch
Vorschau ausblenden Andere Handbücher für SNZB-04:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 35
SNZB-04
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch • Manuel d'utilisation

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Sonoff SNZB-04

  • Seite 1 SNZB-04 User Manual • Uživatelský manuál • Užívateľský manuál • Használati utasítás • Benutzerhandbuch • Manuel d'utilisation...
  • Seite 2 English 3 – 10 Čeština 11 – 18 Slovenčina 19 – 26 Magyar 27 – 34 Deutsch 35 – 42 Français 43 – 50...
  • Seite 3 Dear customer, Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.
  • Seite 4 The device can be operated intelligently via working with the SONOFF ZigBee Bridge to communicate with other devices. The device can work with other gateways supporting ZigBee 3.0 wireless protocol. Detailed information is in accordance with the final product. Operating instruction 1.
  • Seite 5: Product Introduction

    Reset button Features SNZB-04 is ZigBee low-energy wireless door/window sensor that makes you know the opening/closing status of door and window by separating the magnet from the transmitter. Connect it with the Bridge and you can create a smart scene to trigger other devices.
  • Seite 6 SONOFF ZigBee Bridge supports connecting multiple sub-devices at the same time. Power the Bridge on, access the Bridge page in the eWeLink APP, and tap “Add”. Then set the sub-device to be paired to the pairing mode and be patient until the pairing completes.
  • Seite 7: Installation Methods

    Installation methods 1. Tear off the protective film of the 3M adhesive. 2. Try to align the mark line on the magnet with that on the transmitter during installation. 3. Install them in the opening and closing area separately. Make sure the installation gap is less than 10mm when the door or the window is closed.
  • Seite 8: Warranty Conditions

    Application Door Window Note: Do not install outside the door/window. • Do not install in the unstable position or in the place exposed to rain or moisture. • Do not install near wiring or magnetic object. • Warranty Conditions A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
  • Seite 9: Eu Declaration Of Conformity

    Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7 CIN: 27082440 Subject of the declaration: Title: Wireless Door/Window Sensor Model / Type: SNZB-04 The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s): Directive No.
  • Seite 10 WEEE This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste.
  • Seite 11 Vážený zákazníku, Děkujeme vám za zakoupení našeho produktu. Před prvním použitím si prosím pečlivě přečtěte následující pokyny a uschovejte si tento návod k použití pro budoucí použití. Zvláštní pozornost věnujte bezpečnostním pokynům. Pokud máte k přístroji jakékoli dotazy nebo připomínky, obraťte se na zákaznickou linku. www.alza.cz/kontakt ✉...
  • Seite 12: Návod K Obsluze

    Zařízení lze inteligentně ovládat pomocí komunikačního SONOFF ZigBee Bridge a komunikovat s dalšími zařízeními. Zařízení může spolupracovat s dalšími branami podporujícími bezdrátový protokol ZigBee 3.0. Podrobné informace jsou v souladu s finálním produktem. Návod k obsluze 1. Stáhněte si aplikaci 2.
  • Seite 13 Zarovnání linií značek LED Indikátor Tlačítko Reset Funkce SNZB-04 je nízkoenergetický bezdrátový dveřní/okenní senzor ZigBee, který umožňuje zjistit stav otevření/zavření dveří a oken oddělením magnetu od vysílače. Připojte jej k Bridge a můžete vytvořit inteligentní scénu, která spustí další zařízení. Nízkoenergetické...
  • Seite 14 SONOFF ZigBee Bridge podporuje připojení více dílčích zařízení současně. Zapněte zařízení Bridge, přejděte na stránku Bridge v aplikaci eWeLink a klepněte na "Add" (Přidat). Poté nastavte dílčí zařízení, které má být spárováno, do režimu párování a buďte trpěliví, dokud se párování nedokončí.
  • Seite 15: Způsoby Instalace

    Způsoby instalace 1. Strhněte ochrannou fólii lepidla 3M. 2. Při instalaci se snažte zarovnat značku na magnetu se značkou na vysílači. 3. Instalujte je zvlášť v oblasti otevírání a zavírání. Ujistěte se, že instalační mezera je menší než 10 mm, když jsou dveře nebo okno zavřené.
  • Seite 16: Záruční Podmínky

    Aplikace Dveře Okno Poznámka: Neinstalujte mimo dveře/okno. • Neinstalujte jej v nestabilní poloze nebo na místě vystaveném dešti či vlhkosti. • Neinstalujte v blízkosti kabelů nebo magnetických předmětů. • Záruční podmínky Na nový výrobek zakoupený v prodejní síti Alza.cz se vztahuje záruka 2 roky. V případě potřeby opravy nebo jiného servisu v záruční...
  • Seite 17: Eu Prohlášení O Shodě

    Sídlo společnosti: Jankovcova 1522/53, Holešovice, 170 00 Praha 7. IČO: 27082440 Předmět prohlášení: Název: Bezdrátový dveřní/okenní senzor Model / typ: SNZB-04 Výše uvedený výrobek byl testován v souladu s normou (normami) použitou (použitými) k prokázání shody se základními požadavky stanovenými ve směrnici (směrnicích): Směrnice č.
  • Seite 18 WEEE Tento výrobek nesmí být likvidován jako běžný domovní odpad v souladu se směrnicí EU o odpadních elektrických a elektronických zařízeních (WEEE - 2012/19/EU). Místo toho musí být vrácen na místo nákupu nebo předán na veřejné sběrné místo recyklovatelného odpadu. Tím, že zajistíte správnou likvidaci tohoto výrobku, pomůžete předejít možným negativním důsledkům pro životní...
  • Seite 19 Vážený zákazník, Ďakujeme vám za zakúpenie nášho výrobku. Pred prvým použitím si pozorne prečítajte nasledujúce pokyny a uschovajte si tento návod na použitie. Venujte osobitnú pozornosť bezpečnostným pokynom. Ak máte akékoľvek otázky alebo pripomienky k prístroju, obráťte sa na linku služieb zákazníkom. www.alza.sk/kontakt ✉...
  • Seite 20 Zariadenie možno inteligentne ovládať prostredníctvom mostíka SONOFF ZigBee Bridge a komunikovať s inými zariadeniami. Zariadenie môže spolupracovať s inými bránami podporujúcimi bezdrôtový protokol ZigBee 3.0. Podrobné informácie sú v súlade s konečným produktom. Návod na obsluhu 1. Stiahnite si aplikáciu 2.
  • Seite 21: Predstavenie Produktu

    Indikátor LED Tlačidlo Reset Funkcia SNZB-04 je nízkoenergetický bezdrôtový snímač dverí a okien ZigBee, ktorý umožňuje zistiť stav otvorenia/zavretia dverí a okien oddelením magnetu od vysielača. Pripojte ho k mostu a môžete vytvoriť inteligentnú scénu, ktorá spustí ďalšie zariadenia. Nízka energia...
  • Seite 22 SONOFF ZigBee Bridge podporuje pripojenie viacerých čiastkových zariadení súčasne. Zapnite zariadenie Bridge, prejdite na stránku Bridge v aplikácii eWeLink APP a kliknite na tlačidlo "Pridať". Potom nastavte čiastkové zariadenie, ktoré sa má spárovať, do režimu párovania a buďte trpezliví, kým sa párovanie nedokončí.
  • Seite 23: Metódy Inštalácie

    Metódy inštalácie 1. Odlepte ochrannú fóliu lepidla 3M. 2. Pri montáži sa snažte zarovnať značku na magnete so značkou na vysielači. 3. Nainštalujte ich samostatne v oblasti otvárania a zatvárania. Uistite sa, že pri zatvorených dverách alebo okne je montážna medzera menšia ako 10 Hmotnosť...
  • Seite 24: Záručné Podmienky

    Aplikácia Dvere Okno Poznámka: Neinštalujte mimo dverí/okna. • Neinštalujte ho v nestabilnej polohe alebo na mieste vystavenom dažďu alebo • vlhkosti. Neinštalujte v blízkosti káblov alebo magnetických predmetov. • Záručné podmienky Na nový výrobok zakúpený na Alza.sk sa vzťahuje 2-ročná záruka. V prípade potreby opravy alebo iného servisu počas záručnej doby sa obráťte priamo na predajcu výrobku, je potrebné...
  • Seite 25: Vyhlásenie O Zhode Eú

    Sídlo: Jankovcova 1522/53, Holešovice, 170 00 Praha 7. IČO: 27082440 Predmet vyhlásenia: Názov: Bezdrôtový snímač dverí/okien Model/typ: SNZB-04 Uvedený výrobok bol testovaný v súlade s normou (normami) použitou na preukázanie zhody so základnými požiadavkami stanovenými v smernici (smerniciach): Smernica 2014/53/EÚ...
  • Seite 26 WEEE Tento výrobok sa nesmie likvidovať ako bežný domáci odpad v súlade so smernicou EÚ o odpade z elektrických a elektronických zariadení (WEEE –a 2012/19/EU). Namiesto toho sa musí vrátiť na miesto nákupu alebo odniesť na verejné zberné miesto recyklovateľného odpadu. Zabezpečením správnej likvidácie tohto výrobku pomôžete predísť...
  • Seite 27 Kedves vásárló, Köszönjük, hogy megvásárolta termékünket. Kérjük, hogy az első használat előtt figyelmesen olvassa el az alábbi utasításokat, és őrizze meg ezt a használati útmutatót a későbbi használatra. Fordítson különös figyelmet a biztonsági utasításokra. Ha bármilyen kérdése vagy észrevétele van a készülékkel kapcsolatban, kérjük, forduljon az ügyfélszolgálathoz.
  • Seite 28 Az eszköz intelligens módon működtethető a SONOFF ZigBee Bridge segítségével, amely más eszközökkel kommunikál. Az eszköz képes együttműködni más, a ZigBee 3.0 vezeték nélküli protokollt támogató átjárókkal. A részletes információk a végtermékkel összhangban vannak. Használati utasítás 1. Alkalmazás letöltése 2. Alkészülékek hozzáadása Csatlakoztassa a hidat, mielőtt hozzáadná...
  • Seite 29: Műszaki Adatok

    LED kijelző Reset gomb Jellemzők Az SNZB-04 egy ZigBee alacsony energiaigényű vezeték nélküli ajtó/ablak érzékelő, amely a mágnes és az adó elválasztásával megismerhetővé teszi az ajtó és az ablak nyitási/zárási állapotát. Csatlakoztassa a Bridge-hez, és intelligens teret hozhat létre más eszközök indításához.
  • Seite 30 A SONOFF ZigBee Bridge támogatja több alkészülék egyidejű csatlakoztatását. Kapcsolja be a hidat, lépjen be a Bridge oldalra az eWeLink alkalmazásban, és koppintson a "Hozzáadás" gombra. Ezután állítsa a párosítandó alkészüléket párosítási módba, és legyen türelmes, amíg a párosítás befejeződik.
  • Seite 31 Telepítési módszerek 1. Tépje le a 3M ragasztó védőfóliáját. 2. A telepítés során próbálja meg a mágnest a jelzővonallal összehangolni. 3. A nyitó és a záró területre külön-külön szerelje be őket. Győződjön meg arról, hogy a beépítési rés kisebb, mint 10 mm, amikor az ajtó vagy az ablak zárva van.
  • Seite 32: Jótállási Feltételek

    Alkalmazás Ajtó Ablak Megjegyzés: ● Ne szerelje az ajtón/ablakon kívülre. ● Ne telepítse instabil helyzetben vagy esőnek, nedvességnek kitett helyre. ● Ne telepítse vezetékek vagy mágneses tárgyak közelébe. Jótállási feltételek Az Alza.cz értékesítési hálózatában vásárolt új termékre 2 év garancia vonatkozik. Ha a garanciális időszak alatt javításra vagy egyéb szolgáltatásra van szüksége, forduljon közvetlenül a termék eladójához, ahol a vásárlás dátumával ellátott eredeti vásárlási bizonylatot kell bemutatnia.
  • Seite 33: Eu-Megfelelőségi Nyilatkozat

    Bejegyzett székhely: Jankovcova 1522/53, Holešovice, 170 00 Prága 7 CIN: 27082440 A nyilatkozat tárgya: Cím: Vezeték nélküli ajtó/ablak érzékelő Modell / típus: SNZB-04 A fenti terméket az irányelv(ek)ben meghatározott alapvető követelményeknek való megfelelés igazolásához használt szabvány(ok)nak megfelelően vizsgálták: 2014/53/EU irányelv...
  • Seite 34 WEEE Ez a termék nem ártalmatlanítható normál háztartási hulladékként az elektromos és elektronikus berendezések hulladékairól szóló uniós irányelvvel (WEEE - 2012/19 / EU) összhangban. Ehelyett vissza kell juttatni a vásárlás helyére, vagy át kell adni az újrahasznosítható hulladékok nyilvános gyűjtőhelyén. Azzal, hogy gondoskodik a termék megfelelő...
  • Seite 35 Sehr geehrter Kunde, vielen Dank für den Kauf unseres Produkts. Bitte lesen Sie die folgenden Anweisungen vor dem ersten Gebrauch sorgfältig durch und bewahren Sie diese Bedienungsanleitung zum späteren Nachschlagen auf. Beachten Sie insbesondere die Sicherheitshinweise. Wenn Sie Fragen oder Kommentare zum Gerät haben, wenden Sie sich bitte an den Kundenservice.
  • Seite 36: App Herunterladen

    Das Gerät kann durch die Zusammenarbeit mit der SONOFF ZigBee Bridge intelligent betrieben werden, um mit anderen Geräten zu kommunizieren. Das Gerät kann mit anderen Gateways zusammenarbeiten, die das drahtlose Protokoll ZigBee 3.0 unterstützen. Detaillierte Informationen sind in Übereinstimmung mit dem Endprodukt.
  • Seite 37: Spezifikationen

    LED-Anzeige Reset-Taste Eigenschaften SNZB-04 ist ein drahtloser ZigBee-Tür-/Fenstersensor mit niedrigem Energieverbrauch, der den Öffnungs-/Schließstatus von Türen und Fenstern anzeigt, indem der Magnet vom Sender getrennt wird. Verbinden Sie ihn mit der Bridge und Sie können eine intelligente Szene erstellen, um andere Geräte auszulösen.
  • Seite 38: Löschen Von Subdevices

    SONOFF ZigBee Bridge unterstützt den gleichzeitigen Anschluss mehrerer Subdevices. Schalten Sie die Bridge ein, rufen Sie die Bridge-Seite in der eWeLink APP auf und tippen Sie auf "Hinzufügen". Stellen Sie dann das zu koppelnde Untergerät auf den Kopplungsmodus ein und warten Sie, bis die Kopplung abgeschlossen ist.
  • Seite 39 Installationsmethoden 1. Ziehen Sie die Schutzfolie des 3M-Klebstoffs ab. 2. Versuchen Sie bei der Installation, die Markierungslinie auf dem Magneten mit der auf dem Sender auszurichten. 3. Bringen Sie sie im Öffnungs- und Schließbereich getrennt an. Vergewissern Sie sich, dass der Einbauspalt weniger als 10 mm beträgt, wenn die Tür oder das Fenster geschlossen ist.
  • Seite 40: Anmeldung

    Anmeldung Tür Fenster Anmerkung: Nicht außerhalb der Tür/Fenster anbringen. • Installieren Sie das Gerät nicht in einer instabilen Position oder an einem Ort, der • Regen oder Feuchtigkeit ausgesetzt ist. Nicht in der Nähe von Kabeln oder magnetischen Objekten installieren. •...
  • Seite 41: Eu-Konformitätserklärung

    Eingetragener Sitz: Jankovcova 1522/53, Holešovice, 170 00 Prag 7 ID-Nummer: 27082440 Gegenstand der Erklärung: Titel: Drahtloser Tür-/Fenstersensor Modell / Typ: SNZB-04 Das oben genannte Produkt wurde nach der/den Norm(en) geprüft, die zum Nachweis der Einhaltung der in der/den Richtlinie(n) festgelegten grundlegenden Anforderungen verwendet wurde(n): Richtlinie Nr.
  • Seite 42 WEEE Dieses Produkt darf gemäß der EU-Richtlinie über Elektro- und Elektronik-Altgeräte (WEEE - 2012/19 / EU) nicht über den normalen Hausmüll entsorgt werden. Stattdessen muss es an den Ort des Kaufs zurückgebracht oder bei einer öffentlichen Sammelstelle für wiederverwertbare Abfälle abgegeben werden. Indem Sie sicherstellen, dass dieses Produkt ordnungsgemäß...
  • Seite 43 Cher client, Nous vous remercions d'avoir acheté notre produit. Veuillez lire attentivement les instructions suivantes avant la première utilisation et conserver ce manuel d'utilisation pour toute référence ultérieure. Accordez une attention particulière aux consignes de sécurité. Si vous avez des questions ou des commentaires sur l'appareil, veuillez contacter la ligne client.
  • Seite 44 L'appareil peut être utilisé de manière intelligente en travaillant avec le SONOFF ZigBee Bridge pour communiquer avec d'autres appareils. L'appareil peut fonctionner avec d'autres passerelles prenant en charge le protocole sans fil ZigBee 3.0. Les informations détaillées sont conformes au produit final.
  • Seite 45: Présentation Du Produit

    Caractéristiques SNZB-04 est un détecteur de porte/fenêtre sans fil ZigBee à faible énergie qui vous permet de connaître l'état d'ouverture/fermeture de la porte et de la fenêtre en séparant l'aimant du transmetteur. Connectez-le au pont et vous pouvez créer une scène intelligente pour déclencher d'autres appareils.
  • Seite 46 SONOFF ZigBee Bridge permet de connecter plusieurs sous-appareils en même temps. Allumez le Bridge, accédez à la page Bridge dans l'APP eWeLink, et appuyez sur "Ajouter". Réglez ensuite le périphérique secondaire à jumeler en mode de jumelage et soyez patient jusqu'à ce que le jumelage soit terminé.
  • Seite 47: Méthodes D'installation

    Méthodes d'installation 1. Déchirez le film protecteur de l'adhésif 3M. 2. Essayez d'aligner la ligne de repère sur l'aimant avec celle de l'émetteur pendant l'installation. 3. Installez-les séparément dans la zone d'ouverture et de fermeture. Assurez-vous que l'espace d'installation est inférieur à 10 mm lorsque la porte ou la fenêtre est fermée.
  • Seite 48: Conditions De Garantie

    Application Porte Fenêtre Note : Ne pas installer à l'extérieur de la porte/fenêtre. • Ne pas installer dans une position instable ou dans un endroit exposé à la pluie • ou à l'humidité. Ne pas installer à proximité de câbles ou d'objets magnétiques. •...
  • Seite 49 Objet de la déclaration : Titre : Détecteur de porte/fenêtre sans fil Modèle / Type : SNZB-04 Le produit ci-dessus a été testé conformément à la (aux) norme(s) utilisée(s) pour démontrer la conformité aux exigences essentielles définies dans la (les) directive(s) : Directive n°...
  • Seite 50 WEEE Ce produit ne doit pas être éliminé comme un déchet ménager normal, conformément à la directive européenne sur les déchets d'équipements électriques et électroniques (DEEE - 2012/19 / UE). Au lieu de cela, il doit être retourné au lieu d'achat ou remis à un point de collecte public pour les déchets recyclables.

Inhaltsverzeichnis